Press N Bond Floriani

Use this "no sew" bonding material to adhere patches, appliques and embroideries
to most fabrics without stitching!

Press N Bond® withstands laundering and dry cleaning and will crate a permanent bond between fabric surfaces when head is applied. NO sewing is required! Adheres to Vinyl, Polyester, Cotton, Poly cotton and most other fabrics.

To use Press N Bond®

  1. Trace or print the reverse image onto the paper side of Press N Bond®.
  2. Cut the shape to size.
  3. Fuse Press N Bond® to the back of the fabric or embroidery. Use an iron temperature of at least 260° and hold pressure for at least 4 seconds.
  4. Once cooled, peel back the release paper which will expose the fusible surface.
  5. Position the patch/emblem or applique on the base material and press from the fabric side. Use the same temperature settings used in step 3 and hold the iron in place for 4 seconds in order to melt the adhesive.

*Note: All irons vary in temperature. The temperature given is a base estimate. If you find that you are not getting a good bond, increase your irons temperature until the adhesive melts.

**All adhesives will bond more securely to fabrics that do not have sizing or starch applied to the surface. If possible remove these finished before using Press N Bond®.

**Press N Bond® is not recommended for items/fabrics containing Teflon.
Sizes Available: 8" x 11" sheets and 24" x 10 yds.

Back to Floriani Specialty List